Here at Gluegun.com, your opinion matters. It affects the products we carry, the manufactures we represent and how we recommend products to  other valued customers. The best way for us to determine the top products is with your feedback. It lets us know how a product performs in the real world, which ones are up to the challenge and which ones are not.

We know it takes a little bit of your time to write an honest review on the product(s) you have purchased and/or used which is why we are going to add a little incentive for your opinions. Every review you write on a product you have purchased or used, you are automatically entered to win $75 in free stuff from Gluegun.com. We will do a drawing each quarter and the more products you review, the more times you are entered to win. This includes anything in our store from hot glue guns and glue sticks to cartridges guns, nozzles and adhesives. You can find the product review section at the bottom of every product page.

Thanks for your opinions!

- The Gluegun.com Team

Gluegun.com is proud to announce we are an official repair center for Adhesive Technologies (Ad Tech) glue guns including the PRO 200, MT500, HD350, PT500 and all of the other hot melt applications from Ad Tech. Here's how it works.

Ad Tech Glue Gun Repair Overview

First we need to determine what is wrong with your Ad Tech glue gun. This can typically be done quickly and easily with a short phone call or email correspondence. You can find our contact information here to get the discussion started. Our glue gun technicians will be able to walk you through basic troubleshooting determine the best options with regards to your needs.

Time for Repair

If you determine that it makes sense for you to send your glue gun in for repair, we have a fast and simple process to get you back up and running. First, you will need to fill out an RMA (Return Material Authorization) with some basic contact information and a description of the issue you are having. This will help us hit the ground running when you Ad Tech glue gun gets here and also let us know where to send it back after we have made repairs. 

There is a small diagnostic fee of $15 to inspect and clean your glue gun after it has arrived for repair. If this does not fix the issue, a quote will be issued based on time and materials. This way, you will be able to determine if it makes sense to have your gun repaired vs looking at purchasing a new unit. 

Visit our Glue Gun Repair page to start the repair process and get your Ad Tech glue gun up and running like new again.

Surebonder Company Overview

Surebonder is the Gluegun.com vendor of the month! What does that mean? We're going to be offering special promotions and discounts on the Surebonder line of glue guns, glue sticks and accessories all month and highlighting some of their best products with in-depth reviews. We will also be discussing some of the applications where the Surebonder line really excels. 

Formerly the FPC Corporation, Surebonder carries an expertise in fastening. Aside from the industrial adhesives and applicators you can find on Gluegun.com, they also carry nail and staple guns, rivets and more. Why is this important? Because knowing how to get two things to stick together is what these guys do, and they are very good at it. In business since 1968, Surebonder is still a family owned and operated business making products right here in the USA. 

Surebonder and Gluegun.com

This is a true match made in heaven. Surebonder is great at making some of the top glue guns and adhesives on the market and we are great at educating customers about their best uses. The glue geeks at Gluegun.com know these products inside and out and are more than happy to provide samples so you can test and make sure you are buying the best possible adhesive for your very specific needs. On top of fast turnaround times on Surebonder products, Gluegun.com carries a low price guarantee on the entire line of glue guns and adhesives. Contact us today with questions or for more information on the Surebonder FPC product line.

Additional Resources

• Glue Gun Reviews
• Surebonder Glue Sticks
• Surebonder Glue Guns
• Surebonder Bulk Hot Melt

In Case you missed it, use Promo Code SUREGUNMAY10 and receive an additional 10% off of any Surebonder Glue Gun in the month of May.

Gluegun.com is now an official repair center for Power Adhesive TEC Bond glue guns. Our expert repair technicians can quickly diagnose any problems you are having with your Power Adhesive glue gun and offer recommendations on the best way to move forward with a repair.

How It Works

When it's determined that your glue gun needs to be sent in for a repair we will send you a Return Material Authorization (RMA) to send along with your glue gun to our repair center. Read more about our process on our Repair Page. If your Power Adhesive glue gun comes in for repair, we charge a small diagnosis fee which includes general maintenance and cleaning. If this does not resolve your issue, your Gluegun.com technician will issue a quote based on time and materials to perform the repair. At this point, you can make the best decision possible on whether repair or replacement is the best course of action. 

Prices

Our diagnosis fees are based on the TEC glue gun model.

TEC 6100 - Diagnosis Fee $25

TEC 6300 - Diagnosis Fee $25

TEC 7100 - Diagnosis Fee $25

TEC 7300 - Diagnosis Fee $25

All Additional Power Adhesive Glue Guns $15.00.

Additional Resources

Are you a fellow glue gun geek? Check out the Power Adhesives spare parts available for the do-it-yourselfers. Contact us with questions or visit our Glue Gun Repair page to start the RMA process and get you old glue gun back to its former glory. You can also compare prices of a new Power Adhesive Glue Gun here. 

Gluegun.com is proud to announce that we are 3M Glue Gun Repair center. Our 3M Glue gun specialists can help diagnose your issue and determine if your 3M Polygun needs to be sent in for repair. We stock many of the 3M glue gun parts which helps speed up turn around times, getting you up and running faster. 

How It Works

If we determine that your 3M hot melt gun needs to be sent in for repair, we send you a Return Material Authorization (RMA) to return your gun to our repair facility. More details on the simple return process can be found on our Repair Page. We charge a small diagnosis fee which includes general maintenance and cleaning. Sometimes this initial diagnosis will resolve the issue you we will simply ship your 3M glue gun back to you. 

If additional spare parts or work is required, we will issue you a quote based on time and materials so you know exactly what it will cost to get your applicator back up and running. This will help you to determine weather or not repair is the best option for you and help you compare the cost of repair vs purchasing a new 3M glue gun.

Prices

Diagnosis fees are based on the 3M Glue Gun model. If the diagnosis fee does not resolve your issue, a quote will be issued based on time and materials.

3M Polygun AE - Diagnosis Fee $15

3M Polygun TC or LT - Diagnosis Fee $25

3M Polygun EC - Diagnosis Fee $35

3M Polygun PG II or PG II LT - Diagnosis Fee $60

Additional Resources

Feel like a savvy do it your selfer?  You can find the complete list of spare parts for the 3M Polygun's in our 3M Spare Parts Section. Contact us with questions or visit our repair page to start the repair process on your 3M hot melt applicator.