Vibra Tite 131 Permanent Strength Threadlocker
About Vibra Tite 131 Permanent Strength Threadlocker
Vibra-Tite 131 is a high strength, anaerobic thread locking compound. Vibra-Tite 131 is design for permanent locking of threaded fasteners. The product performs on aluminum, steel, plated, stainless steel, and special alloy parts. Vibra-Tite 131 exhibits good temperature and solvent resistant.
Vibra-Tite 131 is color coded red and once cured, seals and vibration proofs the assembly, giving controlled break loose and prevailing torque. When force is applied, the parts break loose (first movement) but it will take several turns before the cured film will stop resisting the turning action, thus ensuring accidental component disassembly.
Vibra Tite 131 is Equivalent to Loctite 262 Series:
- Loctite 26221
- Loctite 26231
- Loctite 26241
- Loctite 26243
Common Applications for Vibra Tite 131
Vibra-Tite 131 will lock and seal large fasteners (up to 1”). Vibra-Tite 131 is used in applications where shock and vibration may cause the fastener to loosen.
Compatible Primers for Vibra Tite 131
Primers such as Vibra-Tite Excel 611 (Primer N) or Excel 612 (Primer T) can be used to speed the fixture time of the adhesive. Fixture times can improve by as much as 50%. The use of primers can result in lower strength and performance should be tested after full cure.
Vibra Tite 131 Environmental and Fluid Resistance
- Heat age @ 150C 100%
- Engine oil @ 150C 80%
- Brake fluid @ 150C 90%
- ATF @ 150C 90%
- 50/50 water/ethylene glycol @ 120C 85%
- Water @ 100C 85%
- Gasoline @ 25C 100%
- Diesel fuel @ 25C 100%
- Ethyl Alcohol @25C 95%
Vibra-Tite 131 Threadlocker Adhesive Specifications
1.8 mL, 10 mL, 50 mL, 250 mL, 1 L, 100pc Fishbowl
2 Years from date of manufacture
|Country of Origin|
|Harmonized Tariff Schedule|
|Temp Range Low|
|Temp Range High|
1800 - 5000
|Max Gap Fill|
|Break Away Torque (in lbs)|
|Prevailing Off Torque (In lbs)|
|Full Cure Time|
ASTM D-5363, MIL-S-46163A, NSF Non-Food
Not recommended for use in pure oxygen, or oxygen rich environments., Not recommended for use with plastics, especially thermoplastics.
Data Sheets »