Vibra Tite 541 High Strength Slip Fit Retaining Compound
About Vibra Tite 541 High Strength Slip Fit Retaining Compound
Vibra-TITE 541 High Strength Retaining Compound is a single part, medium viscosity, high strength anaerobic resin used for bonding rigid assemblies of all types. This material can be used effectively to increase the strength of most mechanical assemblies.
The high strength of this material may require heat to disassemble.
Equivalent to the Loctite 680 Series Retaining Compounds
- Loctite 68015
- Loctite 68035
- Loctite 68060
- Loctite 68090
Vibra Tite 541 Retaining Compound Common Applications
- Locks keys and splines
- Eliminates backlash in worn assemblies
- Locks bearings in place, preventing spin out
- Bonds rotor to shaft in low horsepower motors
- Locks bushings and sleeves in housings and on shafts
- Restores the fit to worn assemblies or out-of-tolerance parts
This high viscosity product is not recommended for extremely close or interference fits. For large gaps, use of Vibra-TITE primer to ensure a fast, full cure is advisable.
Vibra Tite 541 Application Tips
Ensure parts are clean, dry and free from oil and grease.
Vibra Tite 541 High Strength Retaining Compound Specifications
2 Years from date of manufacture
|Country of Origin|
|Harmonized Tariff Schedule|
1.8 mL, 10 mL, 50 mL, 250 mL, 1 L, 100pc Fishbowl
|Full Cure Time|
|Max Gap Fill|
|Temp Range High|
750 - 1650
|Shear Strength (psi)|
Not recommended for use in pure oxygen, or oxygen rich environments., Not recommended for use with plastics, especially thermoplastics.
Data Sheets »