Single 490ml cartridge of MMA 832 adhesive

Roll over image to zoom in Click on image to zoom

MMA 832 Impact Resistant Methacrylate Adhesive - 14 Minute Open Time

Please note: A compatible cartridge gun or cartridge applicator is required to dispense these adhesive cartridges.

Type: Methacrylate (MMA)
Brand: Infinity Bond
Adhesive Ratio: 10:1
Cartridge Size: 490 ml, 10 gal kit
Set Speed: Medium
Bonds: Metal, Plastic, General

Overview of Infinity Bond MMA 832

Infinity Bond MMA 832 is a two-part methacrylate, flexibilized structural bonding adhesive designed for various substrates, including fiberglass, steel, aluminum, and various plastics (excluding low-energy surfaces). Combined at a ratio of 10:1, MMA 832 has a working time of 8 to 12 minutes and reaches nearly 90 percent of its ultimate strength within 18 to 25 minutes at room temperature.

MMA 832 provides high strength and very flexible bonds to these surfaces, typically requiring no preparation. It bonds very strongly to steel, stainless steel, and aluminum, accommodating significant movement of the substrates due to differences in the Coefficient of Thermal Expansion (CTE).

Key Characteristics

Working Time: 8 to 12 minutes (at 75°F)
Fixture Time: 18 to 25 minutes (at 75°F)
Handling Time: 25 to 30 minutes
Operating Temperature: 65°F to 85°F
Gap Filling: 0.375 inches
Mixed Density: 8.1 lbs/gal
Elongation: Greater than 100%
Flash Point: 51°F

Common Questions About Switching from Plexus® MA832

What is the difference between Infinity Bond MMA 832 and Plexus® MA832?

Both use a very similar adhesive formula and therefore have nearly identical adhesive properties and capabilities.

What is the price difference?

Infinity Bond MMA 832 typically costs 20-30% less. Obviously it depends on your Plexus® MA832 pricing.

Note that volume pricing will be lower than the single cartridge pricing listed here.

Do you offer special pricing if I buy in bulk?

Yes, we offer volume pricing. Send us a message and we’ll get that pricing to you right away.

I have other questions, is there someone I can speak with?

Absolutely. Either send us a message or call 855-437-7700.

Submit the form below to get the Technical Data Sheet (TDS) or Safety Data Sheet (SDS) for Infinity Bond MMA 832 sent to your email address.

Questions about Infinity Bond MMA 832? Our team of adhesive specialists can help. Submit your questions and we'll get you answers right away.

Gluegun.com is an official supplier of Infinity Bond adhesives and equipment. We are the largest supplier of Infinity Bond glue guns, glue sticks, and structural adhesives.

View all Infinity Bond products

	MMA 832 Impact Resistant Methacrylate Adhesive - 14 Minute Open Time	Plexus® MA832 Methacrylate Adhesive

Price	$$$$$	$$$$$
Type	Methacrylate (MMA)	Methacrylate (MMA)
Brand	Infinity Bond	Plexus
Mix Ratio	10:1	10:1
Work Life	8 - 12 minutes	12 - 16 minutes
Handling Strength	18 - 25 minutes	55 - 60 minutes
Color	-	Gray
Size	490 mL Cartridges 5 Gallon Pails 50 Gallon Drums	490 mL Cartridges 5 Gallon Pails 50 Gallon Drums
Shelf Life	12 months	-

These values are approximate. Manufacturers often use different parameters for determining adhesive properties. Refer to manufacturer data sheets for detailed specifications. If you have questions, don't hesitate to contact us.