3M 1099 Nitrile High Performance Plastic Adhesive
Product Highlights
- High performance adhesive forms strong bonds on most vinyls and plastics
- Resists weathering, water, oil, plasticizer migration and fuels
- Provides strong, quick drying flexible bonds
- Optional heat cure increases bond strength
- Sprayable with industrial grade spray equipment
About 3M Nitrile High Performance Plastic Adhesive 1099
3M 1099 Nitrile High Performance Plastic Adhesive is quick-drying with an open time of approximately 40 minutes. It resists weathering as well as damage from water, oil and fuel while maintaining a strong assembled bond. Additionally, it bonds well to plastics and vinyl, providing long-term adhesion as well as good resistance to plasticizer migration.
Ideal for Vinyl & Plastic
The 3M 1099 Nitrile High Performance Plastic Adhesive bonds to a variety of substrates - primarily leather and most vinyl sheeting as used in awnings, upholstery and faux leather - as well as plastics, for a strong, enduring bond. However, it may stain thin or light-colored vinyls.
Speed Up the Bonding Process
With 3M 1099 Nitrile High Performance Plastic Adhesive you can quickly meet the requirements of your bonding application. This fast drying adhesive forms a durable bond at room temperature, but also has optional heat-initiated chemical reaction to achieve even higher bond properties. Additionally, this adhesive is sprayable with industrial grade spray equipment, bringing convenience and consistency to large scale applications.
Applying Your Adhesive
Whether it is being sprayed, brushed or rolled on, the application of your 3M adhesive is a straight forward process. Start by carefully applying your adhesive to your surface until you've formed a uniform coat. Using an overlapping pattern, the application of one coat should prove sufficient for most surfaces. Effective adhesive coverage is accomplished with 80% or more of the surface is covered. Some substrates, including porous materials, may require an additional coat. In order to apply additional adhesive, simply wait until the existing adhesive becomes dry to th touch, and then proceed with the application of the additional coat.
Typical Physical Properties
| Property | Values | Notes | Test Condition | |
|---|---|---|---|---|
| Bonding Range | Up to 40 min | 10 mil wet film 2 surfaces | ||
| Color | Light Tan (we and dry) | |||
| Coverage | 456 sq ft/gal | @ 2.5 g/ft² dry wt. | ||
| Flash Point | 0 °F | -18 °C | Closed Cup | |
| Solids Content by Weight | 31 to 37 >#/td### | |||
| Solvent | Acetone | |||
| Viscosity | 2000 to 4000 cP | Brookfield RVF #3 sp @ 10 rpm | 80°F(27°C) |
Typical Uncured Physical Properties
| Property | Values |
|---|---|
| Base | Nitrile Rubber |
| Net Weight | 7.3 to 7.5 lb/gal |
Questions about this product? Our team of adhesive specialists can help. Submit your questions and we'll get you answers right away.
Authorized 3M Distributor
Guaranteed Safe Checkout
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
More from Structural Adhesives
