Plexus® MA560 Alternatives
Two-part methacrylate adhesive designed for structural bonding of thermoplastic, metal, and composite assemblies. Designed for use on large structures where a very long open time product is needed. Plexus MA560-1 is commonly used for bonding stringers and liners into large fiberglass boats with bond lines up to 1.00 in. (25 mm) thick.
Top Alternative for Plexus® MA560
#1 Alternative to Plexus® MA560
Infinity Bond MMA 560 Methacrylate Adhesive 50-65 Minute Open Time
Methacrylate (MMA) from Infinity Bond
Infinity Bond MMA 560 is a two-part methacrylate, structural bonding adhesive designed for the structural bonding of various substrates, including fiberglass, steel, aluminum, and various plastics (not low-energy surfaces). Combined at a ratio of 1:1, MMA 560 has a working time of 50 to 65 minutes and achieves nearly 90 percent of its ultimate strength in 140 to 180 minutes at room temperature curing.
Compare Plexus® MA560 Alternatives
These 2 products share similar properties and features. They are often used for the same applications.
|Type||Methacrylate (MMA)||Methacrylate (MMA)|
|Work Life||55 – 70 mins||50 to 65 minutes|
|Handling Strength||220 - 240 mins||140 to 180 minutes|
|Shelf Life||12 months||12 months|
These values are approximate. Manufacturers often use different parameters for determining adhesive properties. Refer to manufacturer data sheets for detailed specifications. If you have questions, don't hesitate to contact us.
Questions About Alternatives for Plexus® MA560?
Our adhesive specialists can help with any questions about Plexus® MA560, including helping you find the best alternative for Plexus® MA560 based on the specifics of your adhesive application. We've tested hundreds (probably thousands) of adhesive products and use our experience to advise companies of all types and sizes.
Plexus® is a registered trademark of ITW Performance Polymers. This website has no affiliation with Plexus®. Product names are used for comparison purposes only.