Araldite® Fastweld 10 Alternatives
Araldite® Fastweld 10 epoxy adhesive is a rapid-setting, two-component paste offering a convenient one-to-one mixing ratio by volume or weight. Fastweld 10 epoxy adhesive produces strong bonds in a very short period. It is especially suited for bonding small parts and repair work.
Top Alternative for Araldite® Fastweld 10
#1 Alternative to Araldite® Fastweld 10
Infinity EP 100NS Non Sag Gap Filling 5-Minute Epoxy Adhesive
Epoxy from Infinity Bond
EP 100 NS is a two-part, non sag, unfilled, room temperature cure, epoxy adhesive designed for high speed bonding of metals, ceramics, and most plastics. It cures to a tough semi-rigid material, and is a non sag material. It gives good resistance to water, salt spray, inorganic acids and bases, and most organic solvents.
Compare Araldite® Fastweld 10 Alternatives
These 2 products share similar properties and features. They are often used for the same applications.
|Work Life||3-4 minutes||3 - 5 minutes|
|Handling Strength||20 - 30 minutes||20 - 30 minutes|
|Full Cure||24 hours||24 hours|
|Temp Resistance||-40F to 266F||-40F to 266F|
|Shelf Life||12 months||12 months|
These values are approximate. Manufacturers often use different parameters for determining adhesive properties. Refer to manufacturer data sheets for detailed specifications. If you have questions, don't hesitate to contact us.
Get Advice on Araldite® Fastweld 10 Replacements
Finding the right adhesive product for your application can be difficult. That's where our team can help. We've tested hundreds (probably thousands) of adhesive products and use our experience to advise companies of all types and sizes.
Tell us a bit about your application and we'll get a recommendation over to you in no time.
Araldite® is a registered trademark of Huntsman Advanced Materials. This website has no affiliation with Araldite®. Product names are used for comparison purposes only.