Devcon 5 Minute® Epoxy Alternatives
5 Minute® Epoxy is a rapid-curing, general purpose two-part epoxy that bonds well to metals, fabrics, wood, and concrete. It cures to form a strong bond in 5 minutes. It also has good chemical resistance
5 Minute® Epoxy has a work time of 3 minutes and reaches handling strength in 1 hour. It is available in standard 50ml and 400ml cartridges along with some smaller dispensing options.
Devcon 5 Minute® Epoxy has the following manufacturer part numbers: 14270, DA051.
Top Alternative for Devcon 5 Minute® Epoxy
#1 Alternative to Devcon 5 Minute® Epoxy
Infinity EP 100 Clear General Purpose 5-Minute Epoxy
Epoxy from Infinity Bond
Infinity Bond EP 100 Clear is a two-part, unfilled, room temperature cure, epoxy adhesive designed for high speed bonding of metals, ceramics, and most plastics. It cures to a tough semi-rigid material, and is free flowing in viscosity. It gives good resistance to water, salt spray, inorganic acids and bases, and most organic solvents.
Compare Devcon 5 Minute® Epoxy Alternatives
These 2 products share similar properties and features. They are often used for the same applications.
|Viscosity||10,000 cps||12,000 cps|
|Work Life||3 - 6 minutes||3 - 5 minutes|
|Handling Strength||10 - 15 minutes||20 - 30 minutes|
|Full Cure||12 hours||8 - 24 hours|
|Temp Resistance||-40F to 200F||-40F to 266F|
10 Gallon Kit
|Shelf Life||-||24 months|
These values are approximate. Manufacturers often use different parameters for determining adhesive properties. Refer to manufacturer data sheets for detailed specifications. If you have questions, don't hesitate to contact us.
Questions About Alternatives for Devcon 5 Minute® Epoxy?
Our adhesive specialists can help with any questions about Devcon 5 Minute® Epoxy, including helping you find the best alternative for Devcon 5 Minute® Epoxy based on the specifics of your adhesive application. We've tested hundreds (probably thousands) of adhesive products and use our experience to advise companies of all types and sizes.
5 Minute® epoxy and Plastic Welder™ are registered trademarks of ITW Performance Polymers. This website has no affiliation with any of these products. Product names are used for comparison purposes only.