Plexus H4110 Alternatives
Plexus H4110 is a two-part epoxy hybrid adhesive that forms elastic bonds with a range of substrates, including composites, thermoplastics, metal, wood, concrete, and cement. It is a non-sag epoxy with low exotherm and low odor.
Plexus H4110 has a 8-12 minute working time and 65-75 minute handling time. It mixes at a 1:1 ratio and is sold in 400 ml cartridges.
Top Alternative for Plexus H4110
#1 Alternative to Plexus H4110
Infinity Bond EP H3500 All Purpose Non Sag Epoxy
Epoxy from Infinity Bond
H3500 is an all-purpose modified non-sag epoxy that provides excellent tensile, peel, and shear strength. It will hold vertical beads up to 1/2", exhibits superior adhesion and flexibility to a wide variety of substrates including ceramics, concrete, wood, composites, FRP, and most metals without the use of a primer.
Compare Plexus H4110 Alternatives
These 2 products share similar properties and features. They are often used for the same applications.
|Viscosity||Gel||300,000 cps (Gel)|
|Work Life||8 - 12 minutes||15 minutes|
|Handling Strength||65 - 75 minutes||-|
|Full Cure||24 hours||24 hours|
|Temp Resistance||-||-75°F to 350°F|
|Size||400 ml||400 ml
10 gal kit
|Shelf Life||6 months||6 months|
These values are approximate. Manufacturers often use different parameters for determining adhesive properties. Refer to manufacturer data sheets for detailed specifications. If you have questions, don't hesitate to contact us.
Questions About Alternatives for Plexus H4110?
Our adhesive specialists can help with any questions about Plexus H4110, including helping you find the best alternative for Plexus H4110 based on the specifics of your adhesive application. We've tested hundreds (probably thousands) of adhesive products and use our experience to advise companies of all types and sizes.
Plexus® is a registered trademark of ITW Performance Polymers. This website has no affiliation with Plexus®. Product names are used for comparison purposes only.