Get Pricing
Wacker Elastosil A 4 Silicone - Screen Printable
Fill out the details below and we'll get pricing right over to you.
Wacker Elastosil A 4 is a one-part, Amine based silicone adhesive used for bonding and sealing. Like Elastosil A 16 Blue, the A 4 product is one part screen printable silicone. This particular silicone has a very long skin over time and cures with carbon dioxide and moisture.
Typical general characteristics |
Inspection Method |
Value |
Appearance |
WSTM-219 |
Red Liquid |
Viscosity, cP, at 25°C |
WSTM-2103 |
21000 |
Solids (%) |
WSTM-2288 |
92 |
Skin-over Time, min, 25°C with moist carbon dioxide |
WSTM-2290 |
5 |
Skin-over Time, hrs, 25°C, 50% relative humidity, ambient conditions |
WSTM-2118 |
8 |
As Cured (Bead Thickness, 50 100 mil) |
||
Hardness Shore A |
WSTM-1110 |
50 |
Tensile Strength, MPa |
WSTM-1228 |
2.4 |
Tensile Strength, psi |
350 |
|
Elongation at break |
WSTM 1228 |
100 % |
After Fluid Immersion ASTM #1 Oil (70hrs/150 C) |
||
Hardness, points change |
WSTM-1118 |
-15 |
Tensile loss, Max % |
WSTM-1118 |
-20 |
Elongation, loss, Max % |
WSTM-1118 |
-20 |
After Fluid Immersion IRM 903 Oil (70hrs/150 C) |
||
Hardness, points change |
WSTM-1118 |
-30 |
Volume change, % |
WSTM-1118 |
60 |
Heat Resistance (70 hrs/225 C) |
||
Hardness, points change |
WSTM-1116 |
10 |
Tensile loss, Max % |
WSTM-1116 |
-25 |
Elongation, loss, Max % |
WSTM-1116 |
-30 |
Questions about this product? Our team of adhesive specialists can help. Submit your questions and we'll get you answers right away.